Standard- High Speed Steel - Can handle any job that requires soft metal and some ferrous metal deburring.
Upgrade- Tungsten Carbide - Doubles the life expectancy of the tool, especially when deburring ferrous metals such as stainless steel.
DEBURRING:
USE THIS TOOL BEFORE YOU REAM OR TAP THE HOLE, OTHERWISE, DAMAGE TO THE HOLE MAY OCCUR!!!
Adding a dwell time when feeding the tool through the sections to deburr will allow for a cleaner and more efficient deburring process. An illustration is provided belo
You can prevent premature wear and tear on the blade if you use a cooling system to deter heat and debris from damaging the tool.
We recommend:
1. Coolant System
2. Oil System.
3. Air Blow System.
We recommend speed (RPM) and feed ranges for a hole size is below.
NOTES:
If the inside diameter (I.D.) of the part is 3xs greater than the size of the actual hole size, the hole can be chamfered from both sides (front & back) using the standard sizes of the Burr-Bye or the Deburr Master tools.
If the I.D. is less than 3xs the actual hole size, you must use a modified back chamfer only Burr-Bye tool, which is available by special order. Therefore, only the back side of the I.D. can be chamfered.
Contact Bixbay today for industry-leading pricing and customer service.
Manufactures and Distributors please inquire: info@bixbay.com